Building the perfect home Homeowners need to pay attention to every detail. From the exterior design to the small points within the house especially the lighting system. In addition to being neat for the security of the home. Home wiring patterns can also be an indirect addition to the beauty of the home. There are two types of problems for home builders to choose from: “wall-mounted wiring” and “floating wiring.” Although, there are only two methods, there are always questions about which one is better. In this article, “HomeGuru” will take you to know the differences between the two methods “Floating and Wall-Mounted Wiring”. What are the pros and cons? So that homeowners gradually consider and select the style that is most suitable for your home before making a decision.
Floating and Wall-Mounted Wiring, Which One is Better?
What is the floating wiring?
Floating wiring, it is a wiring harness that glides on to the wall. There are 2 main types: clip-on and pipe-type. The pin method is to place the wires open, showing the wires in strands attached to the wall. The wires are bent along the poles along the beams and then connected to the sockets and appliances. The other format is Conduit wiring through PVC pipe or wall-mounted steel pipe. (not hidden under the wall)
The pros of floating wiring
Floating wiring takes less time to install and budget than another type. Because the installation process is not complicated. Just attach the cable or pipe to the wall or ceiling. Homeowners can see the wires from outside. If it is damaged, you can easily check, improve, repair, add-reduce the wiring later. No need to dismantle the wall. No marks on the wall. The wiring in the conduit will help protect the cable more durable. Good protection against insects biting wires.
- Read more articles. Fire is Not a Joke Change Electrical Cables
- Read more articles. Get to Know the Power Cord Professionally
The cons of floating wiring
Need to plan in order to organize the wires to be neat and beautiful especially the hairpin style. Because if there are many electrical appliances may cause the wires to look cluttered on the walls. When used for a long time, the color of the wire and the paint applied over it will fade or peel and look bad.
For wiring in pipes, be careful not to congest the power cord and the length is suitable to prevent a short circuit from being pressed in a narrow place. If the technician uses the wrong type or poor quality electrical conduit. There is an improper deposit extension for reducing the costs. This will cause problems afterwards. The floating operation also causes the sockets and supported light switches to be mounted out of the wall. Therefore, you need to check the distance to fit in the furniture arrangement as well.
Floating wiring, which type of house is suitable?
Pin-clip wiring can be used with any general house, whether it is contemporary house, wooden house, smooth plaster house. The conduit is suitable for the house that shows the raw structure. It does not require the perfect neatness such as the bare concrete houses, loft and industrial style more than other designs.
What is embedded wiring?
Wall-mounted wiring, it is the wiring in the electrical conduit (Electrical Conduit) embedded in the wall or ceiling to cover the conduit. The walls of the house will look flat across the piece without wires. There is no visible conduit on the wall.
- Read more articles. Cable Trimmer Scissors and DIY Electric Tools
- Read more articles. Expired Power Cord Don’t Let It Be Too Late
The pros of embedded wiring
Make the overall picture of the interior look beautiful. If the wires in the pipes are standardized, they will be durable in use for ten years. It can be done in both light walls and masonry. Safe from leakage current. In homes where the wiring is embedded in the wall, there is no complicated procedure. Because there is an internal gap between the structure makes wiring easy, able to install electrical conduit during the installation of the rough frame. Then close the wall panel, making it easy to fix when there is a problem.
The cons of embedded wiring
Operation hiding wires in masonry can be tricky because there are several steps. You must have a good construction plan and use only the skills of skilled technician to get a complete, beautiful job. However, the homeowner should inspect the work closely during the wiring. This is because some technicians can reduce material costs and are often sluggish by hiding wires in walls. Without wiring through pipes. It is easy to damage the wires, electric leakage and shock.
Another disadvantage of the more common buried wiring is under the wall. The power cord may be damaged in an invisible location to reduce – add wires. Or there is a problem with the electrical system in the house and need to chase a check and repair the wiring Need to break the shell out, which is quite difficult. Risk of damage and storage work to repair the walls that leave unattractive traces.
Embedded wiring, which type of house is suitable?
Wall-mounted wiring It works well with every style of home. Be it modern, classic, country or contemporary. But it will be suitable for most modern houses. Because they want the look of the house where the wall and ceiling surfaces are neat and tidy without the wires to look messy.
In conclusion, the two wiring are not only different in appearance. But it also has to do with the home decoration style, maintenance budget at this point, homeowner has to consider the environmental factors including both about the overview of the house. Set expenses in mind, including the difficulty of installation, long-term care complements in order to get things that are suitable and meet the specific needs of our home.